Help

 
 
What type of image is suitable?
For wall graphics and wallpaper any modern digital camera on highest settings will take a photo adequate to use. This typically means 3 megapixel or larger. It is also important that the object you want cropped is a large portion of the picture. If it is cropped out of frame this will result in a lower quality wall graphic.
Tell me me about the the materials you sell

Wall-Graphics.com sells two types of materials. Reusable Repositionable Wall Graphics and Custom Wallpaper. Our wall graphic material is a specialty vinyl made just for sticking to walls. Application is simple (read below).

Our wallpaper will arrive in sections depending on how large of a design you require. You will also need standard wall paper paste to apply the paper. This can be purchased at any hardware store.

Will my graphic be in one piece?
We try to do most all graphics in one piece if possible. However, graphics larger than 48" may be in 2 pieces.
Where can I put my graphic?
Top Installation Surfaces:

• Smooth, non-textured, matte painted drywall / sheet rock.
• Smooth, non-textured, gloss painted drywall / sheet rock.
• Other smooth, non-textured, non-porous surfaces such as glass or metal
• Any smooth, non-textured wall paper

Not Recommended:

• Textured wallpaper
• Textured walls (speckled, orange peel, etc).
• Cinder block or brick.
• Unpainted drywall / sheet rock.
• Outdoor wall surfaces.
• Vehicles
• Any surface that is uneven rough or porous

 

Installation Instructions
  1. IT COULD TAKE TWO PEOPLE.
    Your graphic can be big. You might need four hands and a little patience to get it right.
  2. PICK THE PERFECT SPOT TO SHOW IT OFF.
    Don’t forget to measure before you install. Your
    graphic won’t like textured surfaces. An interior painted drywall surface is always best.
  3. CLEAN THE WALL.
    It is vital that you clean the wall thoroughly and allow it to dry completely before application of the
    graphic. Use a warm damp cloth. Do NOT use any cleaning chemicals or soap as this can affect the
    integrity of the adhesive.
  4. PEEL, STICK IT UP, and
    SMOOTH IT OUT.
    Unroll your graphic and allow some time for it to flatten out prior to applying it to the wall. If your graphic came
    in 2 parts install the bottom half first. With someone on either side of the Graphic, start at the top edge and slowly and evenly peel down toward the bottom edge until the graphic is completely removed from the backing paper. Working together, place one end or corner of the graphic on the wall and slowly smooth the rest of the graphic into place using minimal pressure.

    If needed, gently pull the graphic from the wall and reposition it until you get it right. Next, working from the center to the outside of the graphic, smooth out any bubbles and wrinkles using the palm of your hand. For a two piece graphic, carefully line up the top half with the bottom, smooth it out and then remove any bubbles with your palm.
How long will it take to get my wall graphic?
We're quick! After you have approved your proof your wall graphic will ship in two business days.

I'm having trouble loading my file, can I email it?
Yes! Please email us your file along with what size you are wanting and we can setup a shopping cart for you to purchase.